Borum: A/S Line marking equipment BM 2500 CA

Borum provides cost effective and user friendly professional line marking machines and equipment globally.

Cold Paint Airless Application

From city areas to urban and interurban roads, the BM 2500 can handle both smaller jobs and longer road stretches. The BM 2500 is an agile machine with excellent load abilities. Equipped with the new generation of Borum’s LineMaster computer, operating the machine is easy and convenient. The BM 2500 has a one-seat slidable drive and operator section for flexible working on left or right side. Easy access and servicing of the machine through large doors to the engine room. The BM 2500 CA can be equipped with up to five paint guns and can apply line width of up to 125 cm.

Airless Cold Paint Equipment

High-pressure airless spraying uses a high-pressure airless piston pump to spray the paint. This method can apply paints of high viscosity, and apply relatively thick layers in a single pass. However, the paint cannot be mixed in with glass beads as in the case of atomizing spray equipment due to the pump. Sliding retainer frame, upon which 1-3 paint guns and 1-3 bead guns can be attached as standard. You can also opt for the option wide retainer on which up to 5 paint guns and 5 bead guns can be provided.

Easily slideable retainer from side to side for an optimal working position. Ground distance is maintained by retainer wheel to ensure a constant road marking width.

Lifting of retainer is done from the operator’s seat. The machine can be equipped with multiple material tanks, so that dual-colour marking can be carried out. Working speed can be up to 15 km/h depending on the conditions, e.g. material, line type, and operator experience.