![](https://trafficinfratech-com-500653.hostingersite.com/wp-content/uploads/2022/03/New-Project-2022-03-02T141625.898-300x300.jpg)
Maarten van der Lof
Active transport advocates worldwide look to Amsterdam for inspiration and advice on how to encourage cycling as a safe, attractive and effective mode of transport. MetroCount count spoke to Maarten van der Lof, the City of Amsterdam’s Traffic and Public Space Researcher, to understand the challenges and successes of active transport planning and monitoring cycling in the world’s bicycle capital. His department has recently done survey to determine if light mopeds should be removed from Amsterdam’s cycleways.
The challenges involved in traffic planning for cyclists in Amsterdam
The challenge lies mainly in facilitating cycling in parts of the city where space is the most scarce. How do we ensure sufficiently wide cycle paths and logical routes to safely handle large numbers of cyclists? This is the case in the old centre and the surrounding neighbourhoods.
Car use is being limited by the introduction of low-traffic measures and the removal of car parking spaces in the street. But loading and unloading, for example, must still remain possible. There must also be sufficient space for another vulnerable road user: the pedestrian.
In addition to encouraging cycling, the facilitation of sufficient bicycle parking space is also a challenge here. In the districts further from the centre, where there is more space, the challenge is to get people to cycle more. Compared to vehicle traffic, we still have little real-time insight into cycling volumes, the routes cyclists take and why they do so.
Cycling data to help
Devising new policies and infrastructure all starts with data. We work “evidence-based” as much as possible, to ensure decisions are based in reality and are measurable. We consider volumes of cyclists and other modalities, along with origin and destination information. The data is used as input for our traffic modelling. The most ideal is a combination of automated count data and movement data via apps so that you have information about trends at specific locations around the city and information about the routes that people take.
Choosing the right method depends on your demand and budget. You can often do a lot with camera data, but this is also expensive and there are privacy issues. A pneumatic tube counter is often sufficient, as it gives a good picture of the traffic intensity at a certain location.
The big advantage of tube counters compared to loops counters is that they are flexible, cheap and easy to install for a short period of time. If you want to measure permanently, a counter in the road is more attractive. They are also less sensitive to vandalism or damage from traffic (for example, road sweepers). The data is great, but you depend on whether people want to use the app and whether the data can be shared.
Data is constantly being used to support more space for bicycles. For example, Amsterdam’s inner ring (the route north of the Singelgracht: Sarphatistraat-Weteringschans-Marnixstraat) will be converted into a bicycle boulevard.
Bicycle and public transport have priority here, the car is a guest. Bottlenecks for cyclists are solved and missing links are added to create a logical and attractive cycling route
Amsterdam has banned light moped use on cycle paths
Until April 2019, moped riders were required to ride on the cycle path, not the road. This caused conflicts on the increasingly busy (and often narrow) cycle paths. There was also a large speed difference between light mopeds and cyclists. This led to a relatively high number of road accidents involving mopeds. It was decided to move the moped to the roadway (with helmets mandatory) within the A10 ring road of Amsterdam.
Various studies and pilots preceded the decision to move the moped to the roadway. This included monitoring volumes and speed of each mobility type, but also the number and type of conflicts and the perception of the different road users. The decision itself was also evaluated with a zero measurement, a 1-measurement and a 2-measurement, during which, among other things, compliance with the new rules was monitored. The main outcome is that the number of accidents involving light-moped riders has fallen sharply. Cyclists’ user experience of cycle paths has also improved as they feel safer and enjoy a more pleasant journey overall. Also, the number of light-moped riders in the city has decreased. Some users have switched to higher-powered mopeds, others choose a different way of getting around altogether.